Positive Grid BIAS DISTORTION, Руководство по эксплуатации продукта

Страница: 6 / 31

9 10
OVERVIEW
Control Panel
・ Preset knob
Controls the currently engaged preset. Once a
parameter changes, the LED will start to blink,
indicating that a change has been made to the
current preset. Long-press the Preset knob again
to save your edits to the preset. BIAS Distortion
comes with 20 presets -10 presets for each bank.
Press the knob to switch between the 1st bank
(red) and 2nd bank (blue).
・ GAIN
Controls the amount of distortion in the clipping
stage
(see the Clipping Stage section of this manual).
・ BLEND
Controls the wet/dry ratio of the output stage
(secondary distortion) module.
(see the Output Stage section of this manual).
・ LEVEL
Controls the overall output volume.
・ LOW
Controls the low frequencies’ volume.
・ MID
Controls the midrange frequencies’ volume.
・ HIGH
Controls the high frequencies’ volume.
・ BOOST
Controls the volume of the additional
booster function on the BIAS Distortion
pedal (see the Boost section of this
manual).
・ Boost type
Select from three different boost types (see
the Boost section).
Footswitch Panel
Rear Panel
・ Input
¼” TS Hi-Z input
・ EXP.
¼” TRS jack for an Expression pedal (see the
Expression Pedal section of this manual).
・ Output
¼” TS output
・ USB
Micro USB, for supplying power to the pedal and
integrating it with BIAS Pedal (desktop) software.
・ MIDI In/Thru
Supports standard MIDI with 5-pin MIDI jack (see the MIDI section of this manual).
・ Wireless button/Blinking LED
There are 2 different LED states:
>
LED blinks rapidly - Wireless is in pairing mode and ready to connect with BIAS Pedal mobile.
>
LED stays static - Connecting with BIAS Pedal mobile.
・ 9V DC Power Jack
Supports 9V DC power supply with negative tips. The minimum current draw is 270mA.
BIAS Distortion comes with footswitches
labeled A, B and C, and a BOOST footswitch.
The A, B and C footswitches allow you to
alternately engage and bypass presets for the
BIAS Distortion pedal (see the Footswitch
Mapping section of this manual).
The BOOST footswitch can engage the additional booster circuit BEFORE or AFTER the distortion
effect for the BIAS Distortion pedal.