Positive Grid BIAS DISTORTION, Руководство по эксплуатации продукта

Страница: 18 / 31

33 34
5. BIAS
Lowering the BIAS ADJUST control will
provide a cleaner tone (containing less
harmonics), while higher settings will provide
a warmer tone (with more harmonics).
6. Topology
Tap to choose among 5 transistors and their
different types of distortion. You can also mix
clipping and output stages with different
topologies to experiment with different tones.
7. Post Lowcut
Adjusts the bandwidth of the lower-frequen-
cy range. The higher you set the LOW CUT
FREQ slider , the less extended the bass
response will be in the clipping stage. This
adjusts the tone at the back of the clipping
stage (after distortion).
8. Post Highcut
Adjusts the bandwidth of the high-frequency
band after the clipping stage. The lower you
set the HIGH CUT FREQ slider, the less
extended the high-frequency response will
be after the clipping stage.
Tone Stage
The Tone stage is a secondary distortion stage and a tone-shaping stage.
1. Pre Lowcut
Adjusts the bandwidth of the low-frequen-
cy band. The higher you set the LOW CUT
FREQ slider , the less extended the bass
response will be in the clipping stage. In
other words, this adjusts the tone at the
front of the output stage.
2. Pre Highcut
Adjusts the bandwidth of the high-frequen-
cy band. The lower you set the HIGH CUT
FREQ slider, the less extended the high
response will be in the clipping stage.
3. Distortion
The distortion knob is an extra control that
adjusts the amount of distortion for the
selected topology.
4. Topology
Tap to choose among 5 transistors for
different types of distortion. You can also
mix clipping and output stages with
different topologies to experiment with
different tones.