Positive Grid BIAS DISTORTION, Руководство по эксплуатации продукта

Страница: 17 / 31

31 32
SIGNAL PATH
The signal path shows you how the signal is being processed. Each module in the signal path
provides different functionalities and a different control interface. This section will show you how
to work with these modules and how to get the tone you want.
Custom Panel
The Custom Panel shows how the pedal looks. You can custom-design the look of your pedal by
editing the options listed immediately below.
1. PHOTO
Load a photo from your iPad or computer
to use as the background image for the
pedal. You can alo adjust the image size
and its position on the pedal.
2. RENAME
Name or rename your pedal at any time.
3. BOX
Select the type of box. Different boxes
come with different knob placements and
numbers.
4. COLOR
Select the background color.
5. KNOB
Select the knob design.
Clipping Stage
The Clipping stage is the first distortion stage in the signal path. This stage allows you to design
the gain structure of BIAS Distortion.
1. Pre Lowcut
Adjusts the bandwidth of the low-frequency
range. The higher you set the LOW CUT
FREQ slider, the less extended the bass
response will be in the clipping stage. In
other words, this adjusts the tone at the front
of the clipping stage (before distortion).
2. Pre Highcut
Adjusts the bandwidth of the high-frequency
band. The lower you set the HIGH CUT
FREQ slider, the less extended the high
response will be in the clipping stage.
3. Gain
The GAIN KNOB sets the amount of
clipping-stage input gain and thus controls
the clipping stage’s distortion overall.
4. Distortion
The distortion knob is an extra control that
adjusts the amount of distortion in the
selected topology.