Positive Grid BIAS DISTORTION, Руководство по эксплуатации продукта

Страница: 5 / 31

7 8
Alternatively, you can connect to the
RETURN input of any guitar or bass
amplifier that has an effect loop, which
allows the signal to bypass the preamp
section of the amplifier and directly go
into the power amp.
Either way, BIAS Distortion is now
functioning as a preamp pedal. You are
not only in possession of a powerful
distortion pedal, but also a preamp
pedal with various tonalities.
Connect with BIAS Pedal app
BIAS Distortion comes with the BIAS
Pedal - Distortion Pack license (for
desktop software). You can redeem the
software code on our store page (see
the Redeem & Activate My Software
section). In addition to BIAS Pedal
desktop software, there’s also a mobile
version of BIAS Pedal for iPad available
(sold separately).
To connect with the BIAS Pedal (desktop) software, simply connect BIAS Distortion to your computer
using the supplied Micro USB cable and launch the BIAS Pedal software.
BIAS Distortion will automatically connect with the BIAS Pedal software and initiate Remote Mode
(see the Remote Mode section of this manual).
*Note: If BIAS Pedal mobile is unable to detect your BIAS Distortion pedal, please check that the wireless function is turned on and
reconnect again. Also try bringing your mobile device closer to the pedal.
To connect with BIAS Pedal mobile software, turn on
the Wireless function on BIAS Distortion by engaging
the Wireless button on the rear panel. The LED will
start to blink, indicating that the pedal is now in
pairing mode and ready for connection.
Then launch BIAS Pedal mobile, go to Settings =>
Connect. BIAS Pedal mobile will begin searching for
an active BIAS Distortion pedal nearby and connect
with the pedal automatically.