background image

 

 

Part 2 

ALERT TO OUR HONORABLE CUSTOMERS: 

Please always read thoroughly all the instructions and documents 

delivered with the product before you do anything about it. Don’t 
take any premature action before you have a full understanding of 
the consequences. 

This product contains inside a Lithium battery and maybe also a 

sealed type Lead acid battery if the UPS battery option is ordered. 
Please always follow local environmental protection laws / 
regulations for disposal of used batteries and always replace only 
with battery of same type. 

If you have an UPS battery installed in the product: 

² 

Temperature above 

40°C must be strictly avoided

  as it 

could cause termination of battery life and unexpected result 
even if the battery is not in work. 

² 

Do not

 power off the system just by shutting off the AC 

power leaving the battery supporting the whole system till 
completely exhausted. 

Repeatedly using it up  or improper 

maintenance reduces the battery life dramatically

² 

Always fully recharge the battery at least once every 3 
months if the battery is not connected. 

² 

Always 

disconnect the UPS battery

 from the system if the 

system is to be left OFF for more than 

72 hours

 to prevent 

possible damage. Only connect the UPS battery back right 
before you are going to re-power on the system. 

² 

Replace the battery as soon as the monitoring software 
indicates the battery is out of service. Attempt to recharge a 
dead battery is 

dangerous

² 

A separate battery monitor is not required for this series. 

DAILY MAINTENANCE GUIDE 

For regular cleaning of the PST systems, please use only soft haired 

brush or dry soft cloth. You may use moist soft cloth to remove stains when 
necessary. Apply only proper amount of mild neutral detergent for obstinate 
stains. Please note that never use Acryl dissolving solvent or Polycarbonate 
dissolving solvent. You may apply ammonia-based glass cleaner only on the 
screen surface. 

 

Содержание PST - 7700





















Отзывы: