POSIFLEX PST-6000 SERIES Скачать руководство пользователя

Страница: 56 / 82

PST-6000 series Technical Manual 5 - 26

In the PST6000 series products manufactured since year 1999, there is an

additional feature for software awareness of UPS status. This “operating on battery”

signal can be obtained through checking the communication status of COM1 at signal

DCD provided this signal is not engaged elsewhere. When the system is working on

AC power, the DCD signal of COM1 is reset. When the system is working on battery

power, the DCD signal of COM1 is set. The DCD signal is obtained as the bit 7 (the

most significant bit) of the I/O address 3FEh if the COM1 address is set to

3F8h~3FFh (conventional address for COM1) in system configuration.

INTERNAL MODEM CARD

The AFM100 is an ISA bus card with the illustration for the jumper/switch

settings printed on the card. In PST6000 series, it is advisable to use the internal

modem card as COM3.

To use the internal modem card as COM3, the jumper JP44 on the mainboard

must be disconnected to disable the on board COM3. The AFM100 should then be set

to COM3 using IRQ9 and I/O address of 3E8h.

For software/driver installation, please refer to relevant documentation for the

software applied.

PCMCIA CONTROL CARD

The PST060 is a PnP PCI adapter card. The cardbus controller used on this

card is Ricoh RL5C476. For operating systems MSDOS, WINDOWS 95 and

WINDOWS NT, the user has to purchase for the driver to install this card into the

system from software supplier accessible at web site:

http: //www.systemsoft.com

The PnP driver for this card for operating system WINDOWS 98 and onwards

is included in the operating system. The installation of this card in such system

requires no special effort.

To install this card into WINDOWS95OSR2, the user should do the following:

Install the OSR2 without this card.

Open “Control Panel” and select “System” icon.

Select “Device manager” on “System Properties” dialog box.

Expand “System devices” and double click “PCI bus”.

Содержание PST-6000 SERIES



















































































Результаты поиска

Содержание PST-6000 SERIES

Отзывы:

Похожие инструкции для PST-6000 SERIES

Бренды по названию

Популярные бренды

POSIFLEX PST-6000 SERIES, Техническое руководство

Результаты поиска

Содержание PST-6000 SERIES

Отзывы:

Похожие инструкции для PST-6000 SERIES

Бренды по названию

Популярные бренды