Porsche Mobile Charger Connect, Руководство по эксплуатации

Страница: 27 / 521

25
Intended Purpose
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
EL
CZ
HU
PL
HR
SR
SK
SL
ET
LT
LV
RO
BG
MK
Observe the following instructions and
recommendations in order to guarantee
uninterrupted charging with the charger:
– When installing a new electrical socket, select
an industrial electrical outlet with the highest
possible power available (adapted to the
domestic electric installation) and have it put into
operation by a qualified electrician.
Porsche recommends that you use a certified
Porsche service partner.
– Where technically possible and legally
permissible, the electric installation must
be dimensioned in such a way that the maximum
nominal power of the electrical socket used
is available for charging the vehicle.
– Before installation, check that the necessary
power for charging a vehicle can be continuously
provided with the currently available domestic
installation. If necessary, protect the domestic
installation with an energy management system.
– The charger should preferably be operated in
earthed mains supply systems. The protective
conductor must be properly installed.
– If you are unsure about the electrical domestic
installation, contact a qualified electrician.
Porsche recommends that you use a certified
Porsche service partner.
– If you intend to use the charger with
a photovoltaic system, contact a Porsche partner.
– In order to make full use of the charger and to
ensure fast vehicle charging, use either NEMA
electrical sockets with the highest possible
current rating appropriate for the power plug
or industrial electrical outlets to IEC 60309.
– When charging the high-voltage battery via the
household/industrial electrical outlet,
the electrical installation may be loaded to its
maximum capacity. Porsche recommends that
you have electrical installations used for charging
checked regularly by a qualified electrician.
Ask a qualified electrician which inspection
intervals are appropriate for your installation.
Porsche recommends that you use a certified
Porsche service partner.
– On delivery, the charging current is automatically
limited to prevent overheating of the electrical
installation. Have a qualified electrician bring the
charger into operation and set the charging
current limit as required for the domestic
installation.
f
Refer to chapter “Charging Current Limiting”
on page 35.
Intended Purpose
Charger with integrated control and protection for
mode 2 charging, for charging vehicles with
high­voltage batteries that meet the generally
applicable standards and directives for electric
vehicles.
e
Always use the appropriate device version for the
local mains supply.
f Refer to chapter “Technical Data” on page 41.
The charger may only be used as a combined unit
consisting of supply cables, control unit and
vehicle cable.
Key to Pictograms
Depending on the country, various pictograms may
be attached to the charger.
Operate the charger within a
temperature range from -30 °C
to +50 °C.
The charger should not be
operated at altitudes of more
than 5,000 m above sea level.
The charger is equipped with
a non-switched protective
conductor.
The charger is equipped with
a switched protective conductor.
Dispose of the charger in
compliance with all applicable
disposal regulations.
Do not use extension cables
or cable reels.
Do not use (travel) adapters.
Do not use multiple sockets.
Do not use chargers with
damaged electronics
or connecting cables.
Risk of electric shock due to
improper use.
Observe the operating instructions
provided, particularly the warnings
and safety instructions.
9Y0.012.003.A-EU.book Page 25