background image

5. Frequently asked questions (FAQs)

What can I do if I can’t pair or connect my mobile 
phone despite the Bluetooth

®

 function and visibility 

being enabled?

There are several possible causes:
1.  On some telephone models, each connection request 

by the car must be confirmed by pressing a button. If 
this confirmation is not provided, the connection will 
not be established. This confirmation request each 
time the ignition is switched on can be avoided by 
authorising the PCM in the mobile phone’s device list. 
This device list is found under the Bluetooth

®

 settings 

on most phones.

2.  There are situations where the mobile phone will not 

allow a connection because of an erratic condition. 
Often, the only way to correct this condition is to 
switch the phone off and on again or to briefly remove 
the battery.

3.  It can happen that a mobile phone does not appear 

in the PCM’s search list due to unfavourable external 
conditions. In this case, you can also start the pairing 
process from the mobile phone. Make sure that the 
Bluetooth

®

 function is enabled on the phone and on 

the PCM. Also ensure that the PCM is in the Bluetooth

®

 

device list, since the mobile phone will be able to  
‘see’ it there. In addition, the corresponding menu 
item (PCM visible) must be activated, in Bluetooth

®

 

Settings under PHONE/OPTION/SET PHONE’.

4.  It can happen in very rare cases that the pairing 

information is lost on one or the other side, which 
means the devices cannot establish a connection. 
In this case, delete the entry left on the phone or in 
the car and repeat the pairing process.

5.  Some phone models allow the user to mark the 

Bluetooth

®

 profiles supported. Here too, any loss of 

profile markings may prevent a connection from being 
established.

6.  Bluetooth

®

 connection problems linked to AUX BT may 

be caused by parallel operation or the connection 
sequence of the telephone and audio profiles. In this 
case it may be useful to deactivate the AUX BT 
function by going to DISC-OPTION-SET DISC/AUX to 
ensure all phone functions are stable and reliable.

25

Содержание CDR-30


































Отзывы: