Windows and Sliding Roofs
87
Roll-up sunblind
A roll-up sunblind is integrated in the Panorama
roof system and can be adjusted by actuating the
rocker switch in the roof console.
Opening/closing roll-up sunblind
The rocker switch has a two-stage function:
–
First setting – manual operation
If the rocker switch is pressed to the first
setting, the roll-up sunblind opens or closes for
as long as the rocker switch is actuated.
–
Second setting – one-touch operation
If the rocker switch is pressed completely,
the roll-up sunblind opens or closes to its end
position.
To open the roll-up sunblind:
f
Press rocker switch back.
To close the roll-up sunblind:
f
Press rocker switch forward.
Memory function while closing
The roof and roll-up sunblind cannot be closed at
the same time.
– If the rocker switch is pressed to the second
stage (one-touch operation) while closing the
roof, the roll-up sunblind closes to its end
position after the roof has reached its end
position.
– If the roof is closed (one-touch operation) while
closing the roll-up sunblind, the closing
movement of the roll-up sunblind will be
interrupted. The roll-up sunblind closes to its
end position after the roof has reached its end
position.
Automatic opening of roll-up sunblind
If the roof is opened while the roll-up sunblind is
closed, the roll-up sunblind also opens
automatically.
– When the roof is opened in the vehicle’s
longitudinal direction, the roll-up sunblind also
opens automatically.
– When the roof is opened in the tilt position,
the roll-up sunblind also opens automatically
by approx. 10 cm (ventilation position).
Information
When the roof is in tilt position, the roll-up sunblind
can only be closed as far as ventilation position.
Storing end position of the roll-up sunblind
The end positions of the roll-up sunblind are lost if
the vehicle battery is disconnected/reconnected
or flat, after emergency starting with jumper
cables, if the electrical fuse for the roll-up sunblind
is replaced or after emergency operation.
Information
The end position of the Panorama roof system
may also have to be stored.
f
Always store the end position of the roof and
roll-up sunblind completely one after the other.
If the process for storing the end position is
interrupted, the process cannot be started for
the other drive mechanism.
For information on storing the end position of the
Panorama roof system:
f
Please see the chapter “STORING END
POSITION OF THE PANORAMA ROOF SYSTEM”
on page 86.
When storing the end position, the force limiter is
not available and the roll-up sunblind will close with
full force.
f
Make sure that nobody can be injured when
closing the roll-up sunblind.
Rollup Sun Blind
Operation
WARNING
h
