232
Parking
Reprogramming an individual button on
the keypad
1.
Press and hold the button you want to program
on the overhead operating console keypad
(approx. 20 seconds) until the indicator light
A
on the button
starts to flash slowly.
You now have 5 minutes to teach the button.
2.
Hold the original remote control approx. 12 in.
(30 cm) away from the marked position
(
illustration
) and press and hold the transmit
button until the vehicle’s turn signal lights flash
on and off three times or the indicator light
A
starts flashing quickly.
The turn signal lights flash three times and the
indicator light
A
flashes quickly to confirm that
the new signal has been programmed
successfully.
Several attempts with different distances
between the vehicle and the original remote
control may be necessary.
3.
The turn signal lights will flash once when the
5 minutes teaching time are up.
Repeat steps 1 to 2.
f
Repeat steps 1 to 3 to assign signals to the
other buttons.
