304
Minor Repairs
Towing hook
The towing hook is stored with the tool kit under
the luggage compartment floor.
Fitting the towing hook
1.
Press the lower edge of the appropriate plastic
cover into the bumper until the cover
disengages.
2.
Pull cover out of the bumper and let it hang by
its thread.
3.
Screw in towing hook
A
as far as it will go
(left-hand thread)
and tighten hand-tight.
Removing the towing hook
1.
Unscrew the towing hook
A
.
2.
Insert plastic cover at the lower edge of the
opening.
3.
Fold the cover up and press on its upper edge
to engage it in the bumper.
Pulling vehicle onto flat bed
1.
Position wooden ramps at the base of the flat
bed to reduce the angle of the pull.
2.
Reel in the hoist cable and check the underside
of the vehicle for any interference.
