Lights, Turn Signals and Windshield Wipers
101
Headlight washer system
The washer sprays only while low beam or
high beam is activated.
f
Press button
C
under the wiper stalk.
f
After every 10 wipes on the windshield, the
headlights are cleaned automatically as well.
The wipe count starts from zero again when
the low beam is switched off.
Rear window wiper
Switching on intermittent operation of rear
window wiper
f
Push switch
B
up to detent position
INT
.
Switching off intermittent operation of rear
window wiper
f
Push switch
B
down to detent position
OFF
.
Manual wiping/washing
f
Push switch
B
on the wiper stalk down from
detent position
OFF
or up from detent
position
INT
.
The washer system wipes as long as the
switch is pressed down.
When the wiper stalk is released, a few drying
wipes are performed.
Switching on the rear window wiper when
reverse gear is engaged
In the multi-purpose display, you can configure the
rear wiper to automatically perform a series of
wipes when it rains or when the windshield wipers
are used while reverse gear is engaged.
For information on adjusting the automatic rear
wiper function:
f
Please see the chapter “SETTING ACTIVATION
OF THE REAR WIPER WHEN REVERSE GEAR IS
ENGAGED” on page 134.
Information
f
Clean the wiper blades with window cleaner at
regular intervals, especially after washing the
vehicle in a car wash.
We recommend Porsche window cleaner. If the
wiper blades are very dirty (e.g. soiled with
insect remains), they can be cleaned with
a sponge or cloth.
If the wiper blades rub or squeak, this may be due
to the following:
– If the vehicle is washed in an automatic car
wash, wax residues may adhere to the
windshield. These wax residues can be
removed only by using window cleaner
concentrate.
f
Please see the chapter “ADDING WASHER
FLUID” on page 247.
f
Contact your authorized Porsche dealer for
more information.
– The wiper blades may be damaged or worn.
f
Replace damaged wiper blades immediately.
