
230
Parking
When opening and closing the equipment being
operated, parts of the body could become
trapped or crushed.
f
When using the garage door opener, ensure
that no persons, animals or objects are within
the range of movement of the equipment that
is being operated.
f
Observe the safety notes for the original
remote control.
Information
f
When the button is pressed, the transmitter
unit sends the signal forward in direction of
travel.
Always align the vehicle with the receiver.
Otherwise, range restrictions cannot be ruled
out.
f
Before selling the vehicle, delete the
programmed signals for the garage door
opener on the keypad.
f
Please read the instructions for the original
remote control to find out whether the original
remote control has fixed or changeable code.
Operating the garage door opener
f
Press the corresponding button on the
overhead operating console keypad.
The indicator light
A
lights up during signal
transmission.
Programming garage door opener:
Deleting and storing signals
Preconditions
In order to delete programmed signals and store
garage door opener signals,
– the ignition must be switched on
and
– the turn signals must be off.
f
When using the garage door opener, the
vehicle must be within the range of the
receiver.
f
Canada only:
If programming a garage door opener or gate,
it is advised to unplug the device during
“cycling” process to prevent possible motor
burn-up.
Deleting programmed signals from the keys
This process deletes the standard factory-set
codes. Do not repeat this process if you want to
assign additional signals to the buttons.
f
Keep the two outer buttons
and
on
the overhead operating console keypad
pressed for approx. 20 seconds until the
indicator light
A
on button
starts to flash
quickly.
Assigning garage door opener signal to key
with fixed code system
1.
The standard factory-set codes must be
deleted before programming for the
first
time.
2.
Press and hold the desired button on the
overhead operating console keypad until the
indicator light
A
on the button
starts to
flash slowly.
You now have 5 minutes to teach the button.
Garage Door Opener
Use
WARNING
h