Porsche Cayenne 2009, Руководство пользователя

Страница: 160 / 378

160
Driving and Driving Safety
Ignition lock position 1 - Ignition on
f Turn ignition key to position 1 .
Note on operation
All electrical equipment can be switched on.
The warning lights light up for a lamp check.
f
Please see the chapter “INSTRUMENT PANEL
USA MODELS” on Page 117.
If a load is not switched on for 10 minutes after
switching on the ignition, the ignition must be
switched on again.
Turn the ignition key to ignition lock position 3
(ignition off) first.
Ignition lock position 2 - Starting engine
f
Turn ignition key to ignition lock position
2
.
Ignition lock position 3 - Ignition off
f Turn ignition key to ignition lock position 3 .
f
For further information on starting and stop-
ping the engine:
Please see the chapter “STARTING AND STOP-
PING THE ENGINE” on Page 161.
Locking the steering column
Vehicles without Porsche Entry & Drive
The steering column is automatically locked
when the ignition key is withdrawn from the
ignition lock and is automatically unlocked
when the ignition key is inserted into the ignition
lock.
Vehicles with Porsche Entry & Drive
The steering column is automatically locked
when the ignition is switched off and the vehicle is
locked.
Manually locking the steering column on
vehicles with Porsche Entry & Drive
f Depress the clutch on vehicles with manual
transmission.
f Once the ignition is switched off, turn the
control unit again to ignition lock position 3
and hold it there for 2 seconds .
The steering column is automatically unlocked
by turning the control unit from ignition lock
position
0
.
Emergency operation - unlocking the
ignition key
If the vehicle battery is dead, the key can only be
pulled out of the ignition lock if the emergency
operation is performed.
1. Turn ignition key counter-clockwise.
2. Press a pointed object, e.g. a ballpoint pen, in
the opening A next to the ignition lock and
keep pressed.
3. Remove ignition key.