Porsche 928 GT1991, Руководство пользователя

Страница: 93 / 154

Changing a wheel
WARNING
Failure to follow these instructions may re-
sult in serious personal injuries to you or to
bystanders.
• If you have a flat tire, move a safe dis-
tance off the road. Turn the emergency
flasher on and use other warning de-
vices to alert other motorists.
• Do not park your vehicle where it may
contact dry grass, brush or other
flammable material. The hot parts of
the exhaust system could set such
material on fire, thereby causing both
property damage and severe or fatal
physical injury.
• Passengers must not remain in the
vehicle when it is jacked up.
• Before you change a wheel, be sure the
ground is level and firm. If necessary,
use a board under the jack to ensure
that the jack does not sink into the
ground.
• Set the parking brake and block the
wheels opposite the flat tire on the
other side of the vehicle.
• The jack is only to be used for chang-
ing a wheel. Do not use it as a support
to work under the car.
• Never jack the car up by the body or
the bumpers.
Sequence of operation
Loosen the wheel nuts about one turn,
not yet remove the nuts. Do
Securely insert the car jack in the front
jack port located under the body. There
are two on each side; front and rear.
Do not raise the vehicle until you are sure
the jack is securely engaged.
3. To raise the car, turn the handle
clockwise. Only raise the car as much as
is needed to change the wheel.
4. Fully unscrew all wheel nuts, remove the
wheel and put the collapsible tire on.
5. When the spare wheel is in position,
reinstall the nuts and handtighten them
92