Porsche 928 GT1991, Руководство пользователя

Страница: 105 / 154

Headlight adjustment
Headlight adjustment should be done with a
headlight aiming device under the following
conditions:
At curb weight of car (i.e. car ready for use
and with full fuel tank).
Driver's seat should be occupied by a per-
son or a weight of approx. 155 lbs (70 kg).
Tire pressure must be correct.
Roll car forward a few feet so that the sus-
pension settles into normal position.
1. Remove cover of rubber buffer.
2. Remove Phillips screws from rubber buf-
fer and the transparent side cover with a
screwdriver.
Adjustment screws
Each headlight and each additional head-
light has two adjusting screws. One for lat-
eral and one for vertical setting. Each fog
light has one adjusting screw for vertical ad-
justment. By turning these screws left or
right, the corresponding beam position is ef-
fected. Each fog light has one adjusting
screw for vertical adjustment.
Screw "a" (lateral adjustment)
right turn = beam moves right
Screw "b" (vertical adjustment for headlight
and fog light)
right turn = beam moves up
left turn = beam moves down
Screw "b" (vertical adjustment for addi-
tional headlight only)
right turn = beam moves down
left turn = beam moves up
104