25
BASIC OPERATION
INFORMATION MESSAGES
Some of the more common messages:
Ready
The tub will circulate water every 1/2 hour to maintain a constant water
temperature and the heater runs as needed.
Rest
– The heater runs only during filter cycles.
Ready in Rest
– If the tub is in Rest and the Jets button is pressed, it is assumed
that the tub is being used and it will run the heater to the set temperature.
High Range
– Tub is set in high range and the temperature can be set between
26,5 °C (80 °F) and 40 °C (104 °F).
Low Range
– Temperature can be set between 10 °C (50 °F) and 26,5 °C (99 °F).
(Used to save energy.)
Check your tub’s owner manual for other messages.
WATER TEMPERATURE
TURN ON ANY PUMP
AND LET IT RUN
OCCASIONALLY, YOU MAY
SEE A - - - DISPLAYED
THE TEMPERATURE CAN BE
DISPLAYED IN °F OR °C
The temperature of the wa-
ter is displayed.
The system will display the
temperature in about 1 min-
ute.
This is normal if the pumps
have not been run for a
while – the water tempera-
ture is unknown.
You can change the default
to Fº or Cº on the settings
screen.
