19
Change the filter
May appear on a regular schedule, i.e. every 365 days.
Filters should be replaced occasionally to maintain proper spa function and sanitary conditions.
Reminder messages can be reset from the topside panel.
Additional messages may appear on specific systems.
1.5.17. WARNING! QUALIFIED TECHNICIAN REQUIRED FOR SERVICE AND INSTALLATION
Warning:
People with infectious diseases should not use a spa or hot tub.
Warning:
To avoid injury, exercise care when entering or exiting the spa or hot tub.
Warning:
Do not use a spa or hot tub immediately following strenuous exercise.
Warning:
Prolonged immersion in a spa or hot tub may be injurious to your health.
Warning:
Maintain water chemistry in accordance with the Manufacturers instructions.
Warning! GFCI or RCD Protection
The Owner should test and reset the GFCI or RCD on a regular basis to verify its function.
Warning! Shock Hazard!
Do not attempt service of this control system.
Contact your dealer or service organization for assistance.
Follow all owner’s manual power connection instructions. Installation must be performed by a licensed
electrician and all grounding connections must be properly installed.
1.5.18. MUSIC SYSTEM (OPTION)
To work correctly with the music system, the source device must have the following characteristics:
• Communication protocol: 2.1 Bluetooth® or previous version.
• Profile: A2DP, AVRCP.
• Band frequency: 2.4GHz
• Capacity (range of action): Class 2 – 10m
• Adjustment of audio emission volume.
To carry out the audio connection by Bluetooth® between the D10-BLUTOO amplifier and an audio source
provided with a Bluetooth® A2DP transmission signal, follow these steps:
• Feed power source to the amplifier (loudspeakers must be connected)
• Switch on the source device and trigger on the Bluetooth® function. Search BLUTOO MODO.
• If the connection confirmation is required, enter the pairing code: 0000
• Start an audio track through the player located on the source device
NOTE: in cases of source devices such as mobile phones, you have to perform the “synchronisation of
Bluetooth® devices” by using the function “search devices”. Please refer to the operating manual of your
mobile phone.
Sound
T1 T2
T3
T4
Function
Keys
Volume -
T1
T2
Previous radio station / previous audio file
T3
Next radio station / next audio file
T4
Continuous volume -
T1>1”
Continuous
T2>1’’
Mute (esc pressing T1+T2)
T1+T2>1”
Audio source selection (AUX → BT → FM → AUX → BT…)
T2+T3
