16
1.5.9. ADDITIONAL SETTINGS
Preferences
Preferences
Back
Temp Display
Time Display
Reminders
Cleanup
Dolphin
Color
Language
°F
12 HR
On
0.5 HR
5
Blue
English
The Preferences Menu allows the user to change certain param-
eters based on personal preference.
Temp Display
Change the temperature between Fahrenheit and Celsius.
Time Display
Change the clock between 12 hr and 24 hr display.
Reminders
Turn the reminder messages (like “Clean Filter”) On or Off.
Colour
Pressing the Select Button when Colour is highlighted will cycle through 5 background colours available
in the control.
Language
Change the language displayed on the panel.
1.5.10. INFORMATION
System Information
System Information
Back
Software ID (SSID)
System Model
Current Setup
Configuration Signature
Heater Voltage
Heater Type
Software ID (SSID):
M100_101 V0.6
The System Information Menu displays various settings and
identification of the particular system. As each item in the menu
is highlighted, the detail for that item is displayed at the bottom
of the screen.
1.5.11. GENERAL MESSAGES
Clean the filter
Most messages and alerts will appear at the bottom of the
normally used screens. Several alerts and messages may be
displayed in a sequence.
Some messages can be reset from the panel.
Messages that
can be reset will appear with a “right arrow” at the end of the
message. This message can be selected by navigating to it at pressing the Select button.
– – –°F – – –°C
Water Temperature is Unknown
After the pump has been running for 1 minute, the temperature will be displayed.
Possible freezing condition
A potential freeze condition has been detected, or the Aux Freeze Switch has closed. All water devices are
activated. In some cases, pumps may turn on and off and the heater may operate during Freeze Protection.
This is an operational message, not an error indication.
The water is too hot – M029
The system has detected a spa water temp of 43,3 °C (110 °F) or more, and spa functions are disabled.
System will autoreset when the spa water temp is below 42,2 °C (108 °F). Check for extended pump operation
or high ambient temp.
M0XX numbers are Message Codes.
* This message can be reset from the topside panel.
