manualshive.com logo in svg

Pompetravaini SA Series, Руководство по эксплуатации, Страница: 4 / 48

Поделиться
Скачать
Pompetravaini SA Series Скачать руководство пользователя страница 4

Operating manual liquid ring vacuum pumps and compressors series TRH - TRS - TRM - TRV - SA & Systems type HYDROSYS - OILSYS 

4 

1 - GENERAL INSTRUCTIONS 

 
This manual is intended to provide reference to: 
-  application and operating safety  
-  installation and maintenance for pump or system 
-  starting, operating and stopping procedures for pump or system 
NOTE: 

All  references  made  to  pumps  are  also  applicable  to  systems  that  employ  these  pumps,  unless  otherwise 
specified. 

Upon receipt of this manual, the operator should complete the bottom page with the requested data. The manual should 
then  be  read  CAREFULLY  and  kept  in  a  safe  file  for  future  reference.  It  should  always  be  available  to  the  qualified 
operating and maintenance personnel responsible for the safe operation of the pump or system. 
Definition of "Authorized person or person" 
The pages of this manual for "authorized person or personnel" refer to those who, due to their experience, training and 
knowledge  of  accident  prevention  regulations,  have  been  instructed  by  the  plant  manager  to  intervene  for  the 
adjustment, maneuvering and maintenance operations of the job they perform within the company organization. 
 

 

IMPORTANT! 
The  pump  is  to  be  used  only  for  the  applications  specified  on  the  confirming  order  for  which 
POMPETRAVAINI has selected the design, materials of construction and tested the pump to meet the order 
specifications. Therefore the pump CANNOT be used for applications other than those specified on the order. 
In the event the pump is to be used for different applications, please contact the sales office or representative 
of the manufacturer. POMPETRAVAINI declines to assume any responsibility if the pump is used for different 
applications without prior written consent confirmation. 
Pumps  are  for  industrial  and  continual  use  in  installations  fit  for  the  purpose  by  authorized  and  trained 
personnel. The use in unfit or unprotected installations, without proper precautions preventing the contact with 
untrained personnel or children, is strictly forbidden 

 
If construction and operation data of the pump in question are not available must be 
requested to POMPETRAVAINI specifying the type and serial number printed on the 
nameplate (see example at side) easily identifiable on the pump itself: always refer to 
it to request additional technical information and/or ordering spare parts. 
The user is responsible for the verification of the ambient conditions where the pump 
will  be  stored  or  installed.  Extreme  low  or  high  temperatures  may

 

severely  damage 

the pump or system unless proper precautions are taken. 
POMPETRAVAINI  does  not  guarantee  repairs  or  alterations  done  by  user  or  other 
unauthorised personnel. 
Special  designs  and  constructions  may  vary  from  the  information  given  in  this  manual.  Please  contact 
POMPETRAVAINI should you have any difficulty or doubt. 
 
NOTE: 

Drawings appearing in this manual are only schematics. These drawings are not for construction. 

 

 

 

For

 

construction drawings contact POMPETRAVAINI or the authorised local representative. 

 
 

2 - SAFETY INSTRUCTIONS 

 

 

CAUTION: 
CAREFULLY READ FOLLOWING INSTRUCTIONS. 

 
Strictly adhere to the instructions listed below to prevent personal injuries and/or equipment damage. 
-  ALWAYS apply the pump for the conditions outlined on the confirming order. 
-  Be  ALWAYS  informed on locations of first aid sites inside the company and carefully read safety and medical first 

aid prescriptions in force. 

-  ALWAYS have a fire extinguisher in the vicinity of the pump installation. 
-  Any work on the pump must ALWAYS be carried out by at least 2 qualified people and expressly authorized. 
-  Electrical  connections  on  the  motor  or  accessories  must  ALWAYS  be  carried  out  by  authorised  personnel  and  in 

accordance to the local codes. 

-  When  approaching  the  pump  ALWAYS  be  properly  dressed  (avoid  use  of  clothes  with  wide  sleeves,  neckties, 

necklaces, etc.) and/or wear safety equipment (hard hat, safety glasses, safety shoes, etc.) adequate for the work to 
be done. Also refrain from wearing long and loose hair. 

-  DO NOT attempt to remove the safety guards when the pump is operating. 
-  After completion of the work ALWAYS re-install the safety guards previously removed. 
-  DO NOT operate the pump in the wrong direction of rotation. 
-  NEVER put hands or fingers in the pump openings or holes. 
-  ALWAYS disconnect the power to the motor prior to working or removing the pump from the installation. 
-  Make sure you have taken the necessary steps to prevent a possible inadvertent return of tension. 
-  Ensure the proper isolation of the components and ground connection before inserting the tension. 
-  ALWAYS stop the pump prior to touching it for whatever the reason. Wait for the complete pump stopping and make 

i

H

Q

KW
mbar

3

PUMP TYPE

SERIAL NO.
ITEM

YEAR

ISO 9001 Certified

20022 CASTANO PRIMO (MILANO) - ITALY

abs.

m  /h
m.c.l.

S.p.A.

Содержание SA Series

















































Отзывы:

Нет отзывов