POMCube iCAN NetZero Plus Series, Руководство пользователя

Страница: 42 / 48

39
(6)
The Status Indicator on BCMS module/battery system is solid red and
the Status Indicator on at least one battery module is solid red
The battery system is in the
most critical level protection
mode.
Charge the battery, or reboot the battery
system. If it does not recover, shut it down
and contact us.
(7)
The Status Indicator on BCMS module/battery system is solid red and
the Status Indicator on every battery module is solid green.
Battery system over-current/
short circuit protection.
Disconnect output switch of battery
system, check if there is an external short
circuit, and reboot the battery system. If it
does not recover, shut it down and contact
us.
(8)
The Status Indicator on BCMS module/battery system is solid red and
the Status Indicator on at least one battery module is solid yellow or off.
The battery system is in the
low voltage protection mode. Charge the battery.
The battery system is in the
High voltage protection mode.
Check if the communication cable for
BCMS and EMS is disconnected;
Leave it switched ON for 30 minutes.
If it does not recover, shut it down and
contact us.
(9)
The Status Indicator on BCMS module/battery system keeps blinking in
blue for over 60 seconds.
Battery system failed in self-
inspection.
Reboot the battery system.
(10)
The Status Indicator on at least one battery module keeps blinking in
blue for over 30 seconds.
Failure in CAN communication. Reconnect communication cable between
BCMS and battery module, then reboot
the system.