POMCube iCAN NetZero Plus Series, Руководство пользователя

Страница: 41 / 48

38
Troubleshooting
In any cases of device failure, please check alarms on APP and proceed as
instructed, accordingly. If APP fails to connect to the device, check the status of
each indicator and possible reasons and solutions as follows:
(1)
The Network Indicator on Universal PCS is always solid red.
The energy management unit
may be crashed or damaged.
Press the ON/OFF button to reboot the
Universal PCS. If it is not recovered, shut it
down and contact us.
(2)
The Network Indicator on Universal PCS is always blinking red.
The Wi-Fi is not 2.4G. Select a 2.4G Wi-Fi for Wi-Fi connection.
The indicator was not blinking
red before configuring the
network.
Make sure the indicator is blinking red
before configuring the network. Try to re-
configure the network.
(3)
The Network Indicator on Universal PCS is always blinking green.
The router may not work
properly.
Check the router status. Reset the router if
necessary.
The Wi-Fi password entered
was incorrect.
Try to re-configure the network.
Wi-Fi unit was changed. Re-configure the network.
Ethernet cable disconnected
(if applicable)
Double check and reconnect Ethernet
cable
(4)
The Network Indicator on Universal PCS is always solid white.
Something is wrong with the
router or Internet.
Check your internet status. Reset the
router if necessary.
(5)
Generator fails to start remotely.
The generator may not work
properly.
Check the generator.
Remote control cable is
disconnected.
Check and reconnect the cable.