16
The assignment is as follows:
1 = MUX 1 via CI 1
5 = MUX 5
2 = MUX 2 via CI 2
6 = MUX 6
3 = MUX 3 via CI 3
7 = MUX 7
4 = MUX 4 via CI 4
8 = MUX 8
Press the button
Save
after finishing assignment of the desired programs to output channels and selection of the
programs to be decrypted. The configuration will be saved.
8.2.5. Output parameters SPTS (Single Program Transport Stream)
Click on
Menu * SPTS Settings
Now the following dialogue window will be displayed:
The IP addresses, ports and network protocols can separately be set for each service (program) either manually or
automatically via the control panels below. The network protocol can be selected separately for each service
(program)
Factory setting: RTP. The SPTS stream can be switched on or off separately for each service
(program) by placing a tick in the relevant box.
Note:
In SPTS mode, the EPG function (EIT insertion) is switched off by default and can be activated as
shown above. When it is activated, it must be ensured that sufficient bandwidth is available in the IP
network to accommodate it.
Single SPTS streams
On
or
Off
EPG data
On
or
Off
UDP
or
RTP
