13
8.2.2 Input parameters for the terrestrial range
TP > Frequency
BW > Channel bandwidth
The kind of input signal will be
Select 7 or 8 MHz
defined automatically.
Enter input frequency
PLP > Select service DVB-T2
Search > Searching
Select
PLP value
After pressing button
(only for DVB-T2)
Search
the data is accepted
And the desired channel is set.
If the tuner locks on the
transponder,
Tuner Locked
is displayed in the upper field.
Reception conditions (DVB-T/T2/C)
The quality of the input signal can be evaluated by using the bit error rate
BER
and the
signal-to-noise ratio
SNR
.
These depend on the quality of the reception conditions and the signals.
Recommendation: Bit error rate
BER
should be ≤ 1e-6.
Required threshold value for the signal-to-noise ratio SNR is 26 dB for DVB-T and 32 dB
for DVB-T2.
