11
8.2 Programming of the device parameters
After successful network access, the following overview window is displayed:
Via this menu, all settings of the input and output parameters can be done. The status display is automatically
updated every 3 seconds.
The upper part of the menu shows the device data such as type, serial number, hardware version and the software
versions for CPU, IP-, CI-ASI controller und MUX. The information about the total data rate is also displayed here.
The channel related setting and selection options for MPTS, IP address, port and protocol are displayed in the lower
part of the menu.
Call up this overview menu via the menu item
Menu * Input & MPTS Settings
.
