Polytec PSV 300, Руководство по оборудованию

Страница: 59 / 105

     
                           
        
    After being switched on or RESET, the controller shows that it is ready to After being switched on or RESET, the controller shows that it is ready to
operate with the menu INTRO. It is not possible to change back to this menu
operate with the menu INTRO. It is not possible to change back to this menu
as it does not have a
as it does not have a control function. control function.
    This menu provides information on the This menu provides information on the decoders and interfaces installed. The decoders and interfaces installed. The
individual configurations are described in the following. individual configurations are described in the following.
   
This line shows the velocity decoders installed and the This line shows the velocity decoders installed and the number of available number of available
velocity measurement ranges. The following abbreviation velocity measurement ranges. The following abbreviations are used s are used for the for the
individual decoders: individual decoders:
Example: Example:
3DC + 4HF means that the veloci
3DC + 4HF means that the velocity decoder PLL-DC w ty decoder PLL-DC with 3 ith 3 measurement measurement
ranges and the velocity decoder OVD-04 with 4 ranges and the velocity decoder OVD-04 with 4 measurement ranges are measurement ranges are
installed. installed.
     
When operating the controller via the IEEE When operating the controller via the IEEE-488 -488 // GPIB interface on the back in GPIB interface on the back in
this line the instrument address can be set in the range this line the instrument address can be set in the range   ..
   
When operating the controller via the RS-232 interface on the back When operating the controller via the RS-232 interface on the back in this line in this line
it is possible to switch between the transfer rates it is possible to switch between the transfer rates
      
and and
      
..
Table 5.1: Abbreviations of the individual velocity decoders Table 5.1: Abbreviations of the individual velocity decoders
   
D DC C P PL LL L--D DC C
H HF F O OV VD D--0 04 4
 
If you control the PSV using the software via the IEEE-488/GPIB interface, the If you control the PSV using the software via the IEEE-488/GPIB interface, the
IEEE-488/GPIB address of the controller must be set to IEEE-488/GPIB address of the controller must be set to   !!
 
For all PSV models, here the transfer rate must be set to For all PSV models, here the transfer rate must be set to        !!