Polytec PSV 300, Руководство по оборудованию

Страница: 32 / 105

       
                 
All system components should now be correctly mounted. All system components should now be correctly mounted.
   
The individual steps on cabling the The individual steps on cabling the PSV are described in the following. The PSV are described in the following. The
complete cabling is shown in complete cabling is shown in fig fig ure ure 3.1 3.1 6 6 to to fig fig ur ur e e 3.1 3.1 8 8 . All connections must . All connections must
be made easily. If not, check the plugs for bent contact pins to avoid serious be made easily. If not, check the plugs for bent contact pins to avoid serious
damage being incurred. Secure the connections correspondingly. Should any
damage being incurred. Secure the connections correspondingly. Should any
problems occur in cabling, please contact your local Polytec representative.
problems occur in cabling, please contact your local Polytec representative.
 
1. 1. Conne Connect the ke ct the keyboa yboard to the so rd to the socket K cket KEYB EYBOAR OARD on the back o D on the back of the f the
workstation. workstation.
2. 2. Conne Connect the mo ct the mouse to the s use to the socke ocket MOU t MOUSE on th SE on the back of th e back of the work e workstat station. ion.
3. 3. Plug t Plug the moni he monitor cab tor cable into t le into the back o he back of the moni f the monitor and in tor and into the soc to the socket ket
MONITOR on the back of the workstation. MONITOR on the back of the workstation.
 
⇔ ⇔
 
4. 4. T To opera o operate the c te the contr ontroller v oller via the s ia the soft oftware ware, plug a , plug an n   cable into the cable into the
jack jack RS 23 RS 232 on 2 on the the back back of t of the co he contro ntroller ller and i and into nto eith either o er of the f the jack jacks s
COM1 or COM2 on the back of the workstation. COM1 or COM2 on the back of the workstation.
 
⇔ ⇔
   


5. 5. If appl If applicabl icable, conn e, connect the opt ect the optional ha ional hand set OFV nd set OFV-310 to the ci -310 to the circula rcular jack r jack
REMOTE FOCUS on the back of the controller. REMOTE FOCUS on the back of the controller.
 
⇔ ⇔
     
6 6.. P Pllu ug g tth he e   cable into the Sub-D jack INTERFEROMETER cable into the Sub-D jack INTERFEROMETER
on the back of the controll on the back of the controller and into the Sub-D jack VIBROMETER on the er and into the Sub-D jack VIBROMETER on the
back of the junction box. back of the junction box.
7. 7. For t For transm ransmissi ission of t on of the vel he velocit ocity sig y signal, nal, plug t plug the he
 
cable into the BNC cable into the BNC
jack jack VELOC VELOCITY O ITY OUTPU UTPUT on T on the the fron front of t of the c the contro ontroller ller and i and into nto the the BNC BNC
jack jack VELO o VELO on the n the fron front of t of the the junc junction tion box. box.
 


8. 8.     If required, connect the reference signal to the BNC jack If required, connect the reference signal to the BNC jack
REF REF 1 on the front of the junction box for the model -H. 1 on the front of the junction box for the model -H.
      If required, connect the reference signal to the BNC jack If required, connect the reference signal to the BNC jack
REF on the front of the junction box for the models -F REF on the front of the junction box for the models -F and -U. and -U.
9. 9.        You can connect two additional reference signals to the You can connect two additional reference signals to the
BNC jacks RE BNC jacks REF F 2 and REF 2 and REF 3 on the front of the junction box for the model 3 on the front of the junction box for the model
-H. -H.
 


10. 10. If required, connect th If required, connect the external trigger signal to t e external trigger signal to the BNC jack TRI he BNC jack TRIG IN on G IN on
the front of the junction box. the front of the junction box.
 
  connect all components to each other connect all components to each other   plugging in the mains cables! plugging in the mains cables!