Polytec PSV 300, Руководство по оборудованию

Страница: 12 / 105

   
                 
   
 
 
Opening up of the Opening up of the equipment without authorization is not necessary for its equipment without authorization is not necessary for its
operation and will invalidate the warranty. operation and will invalidate the warranty.
       
  The PSV consists of the following components: The PSV consists of the following components:
 
controller OF controller OFV-3001 V-3001S S
 
scanning head OFV-056 scanning head OFV-056
 
junc junction tion box box PSV-Z-04 PSV-Z-040 (- 0 (-H, -F, -U) H, -F, -U)
 
workstati workstation with on with keyboard and mouse keyboard and mouse
 
monitor with monitor cable and monitor with monitor cable and mains cable mains cable
 
tripod with fluid stage OFV-S2 tripod with fluid stage OFV-S2
 
umbilical cable umbilical cable
 
interferomete interferometer r cable cable
 
video cable video cable
 
acquisition cable acquisition cable
 
DIO/ DIO/ DAC c DAC cable able
 
BNC cable BNC cable
 
2 RS-232 cables (1:1 wired) 2 RS-232 cables (1:1 wired)
 
3 mains cables 3 mains cables
 
PSV 300-H, -F: hand set PSV-Z-051 PSV 300-H, -F: hand set PSV-Z-051
optional optional
 
TFT monitor with monitor cable and TFT monitor with monitor cable and mains cable mains cable
 
heavy duty tripod with motorized pan-tilt stage, connector box and mains heavy duty tripod with motorized pan-tilt stage, connector box and mains
cable PSV-Z-017 (instead of the OFV-S2)
cable PSV-Z-017 (instead of the OFV-S2)
 
PSV 300-H: generator cable for the PSV 300-H: generator cable for the internal function generator internal function generator
 
PSV 300-U: hand set PSV-Z-051 PSV 300-U: hand set PSV-Z-051
 
coaxial unit OFV-056-C coaxial unit OFV-056-C
 
acoustic gate unit PSV-Z-EQ with BNC cable acoustic gate unit PSV-Z-EQ with BNC cable
 
system cabinet PSV-Z-035 system cabinet PSV-Z-035
 
hand set OFV-310 hand set OFV-310
 
vertical test stand PSV-Z-018 vertical test stand PSV-Z-018
  Please pay attention to the following steps when unpacking the PSV: Please pay attention to the following steps when unpacking the PSV:
1. 1. Chec Check the pack k the packaging fo aging for signs of uns r signs of unsuit uitable han able handling dur dling during tran ing transpor sport. t.
2. 2. Aft After unpac er unpacking, ch king, check all comp eck all component onents for extern s for external damag al damage (scrat e (scratches ches,,
loose screws etc.). loose screws etc.).
3. 3. In the c In the case of a ase of a wrong delivery wrong delivery, damage , damage or missing or missing parts, parts, inform your inform your local local
Polytec represent Polytec representatives immediately and give them the serial atives immediately and give them the serial numbers of numbers of
the instruments. The identificati the instruments. The identification labels can on labels can be found on be found on the back of the the back of the
instruments and also on the inside instruments and also on the inside cover of this manual. cover of this manual.
 
Protect the unpacked scanning head from hard jolts as these can lead to misalignment of Protect the unpacked scanning head from hard jolts as these can lead to misalignment of
the interferomete the interferometerr !!