Polytec PSV 300, Руководство по оборудованию

Страница: 57 / 105

   
                           
               
     
In normal operation the keys FUNCTION and SETTING on the controller are In normal operation the keys FUNCTION and SETTING on the controller are
deactivated and all settings are adjusted via the software. It is also possible to
deactivated and all settings are adjusted via the software. It is also possible to
make measurements withou
make measurements without using the t using the workstati workstation. In this case on. In this case you can only you can only
make single-point measurement make single-point measurements and you s and you can not make use can not make use of the digital data of the digital data
processing of the PSV. The velocity signal is then available at the BNC jack processing of the PSV. The velocity signal is then available at the BNC jack
VELOCITY OUTPUT on the front of the controller.
VELOCITY OUTPUT on the front of the controller.
The controller is operated via a menu on its display using the keys The controller is operated via a menu on its display using the keys
FUNCTION and SETTING. The operating structure is mainly self-explanatory.
FUNCTION and SETTING. The operating structure is mainly self-explanatory.
The individual menus are described in
The individual menus are described in se se ct ct ion ion 5.1 5.1 2.3 2.3 ..
The menu SETTINGS is shown in The menu SETTINGS is shown in fi fi gu gu re re 5. 5. 4 4 as an example of the display. as an example of the display.
Figure 5.4: Example of the controller’s display Figure 5.4: Example of the controller’s display
The parameters are run through vertically on The parameters are run through vertically on the display using the keys the display using the keys
↑ ↑
and and
↓ ↓
. Once the end of the display page is reached, it changes to the . Once the end of the display page is reached, it changes to the next next
menu. The possibility of branching off to other menus is shown at the top and menu. The possibility of branching off to other menus is shown at the top and
the bottom on the right. the bottom on the right.
The cursor The cursor
⇒ ⇒
on the left marks a selected parameter. The setting of the on the left marks a selected parameter. The setting of the
parameter is changed to higher and lower values with the keys parameter is changed to higher and lower values with the keys
++
and and
−−
..
Adjusted settings are activated straight away. Adjusted settings are activated straight away.
As the control processor has a battery supported memory, the settings are As the control processor has a battery supported memory, the settings are
stored when the instrument is switched off and reloaded when it is switched
stored when the instrument is switched off and reloaded when it is switched
on again or after RESET. This saves time making adjustments for repeated
on again or after RESET. This saves time making adjustments for repeated
measurements.
measurements.
  Using Using the the keys keys
↑ ↑
and and
↓ ↓
a menu is a menu is selected and within the menu selected and within the menu
a parameter is selected. a parameter is selected.
  Settings Settings are are changed changed using using the the keys keys
++
and and
−−
..
Focus Focus
↑ ↑
⇒ ⇒
T Trra ac ck kiin ng g F Fiilltte err F Fa as stt
V Ve ello oc ciitty y D De ec co od de err H HF F
V Ve ello oc ciitty y R Ra an ng ge e 1 12 25 5 m mm m//s s//V V
V Ve ello oc ciitty y F Fiilltte err o offf f ((1 1..5 5 M MH Hz z))
S Siig gn na all
Config Config
↓ ↓