Polyprint TEXJET Скачать руководство пользователя страница 2

Страница: 2 / 54

POLYPRINT SA – TEXJET OPERATION MANUAL V6.4 EN

- 2 -

No part of this publication may be reproduced mechanically or electronically or in any form without the

prior written permission of Polyprint S.A. The information in this manual is for informational use only,

is subject to change without notice and should not be construed as a commitment by Polyprint S.A.

Polyprint S.A. assumes no responsibility or liability for any errors or inaccuracies that may appear in

this document. Polyprint is a trademark or trade name of Polyprint S.A., Thessaloniki, Greece.

Federal copyright laws permit you to make a backup of software included with TexJet for archival

purposes only. Any other duplication of this software, including copies offered through sale, loan,

rental or gift is a violation of law, and subject to both criminal and civil penalties.

POLYPRINT SA

Digital Textile Printing Solutions

17 Noemvriou 81, 54352

Thessaloniki, Greece

Tel. +30 2310 949366

Fax +30 2310 246419

E-mail : [email protected]

www.polyprint.gr

Technical Support

Tel. +30 2310 949366

[email protected]

Operation manual version 6 English

Содержание TEXJET























































Результаты поиска

Содержание TEXJET

Отзывы:

Бренды по названию

Популярные бренды

Polyprint TEXJET, Руководство по эксплуатации

Результаты поиска

Содержание TEXJET

Отзывы:

Бренды по названию

Популярные бренды