Administrator’s Guide for the V500 System
3 - 10
To configure a D-Link router:
1.
Check if you have a D-Link DI-604 router. If you have a different model,
the settings in these steps may vary slightly.
2.
In a browser such as Internet Explorer, type the IP address of your router,
which you can find in your router’s documentation.
3.
Log in to your router setup using the user name and password, which
you can find in your router’s documentation.
4.
Select the
Advanced
tab.
5.
Click
Firewall
.
6.
On the Firewall page, enter this information for the first port you need to
open (such as port 1720):
7.
When you have opened and assigned all of the ports listed in the table on
page
3-7
, review the Firewall Rules list. Check that all the ports are
correct, enabled, and assigned to the correct IP (internal) Address.
Setting
Description
Enabled
Click this radio button.
Name
Any unique identifier (for example, you can use the
text from the Function column in the table on page
3-7
).
Action
Click
Allow
.
Source
Interface: WAN
IP Range Start: *
IP Range End: (blank)
Destination
Interface: LAN
IP Range Start: The IP address (internal) that the
NAT has assigned to your system.
IP Range End: (blank)
Protocol: TCP, UDP, or * for both
Port Range: The specific port or the starting and
ending value of the range of ports (see the table on
page
3-7
for the list of ports).
Schedule
Click
Always
(or select a time for the port to be open).
Содержание V500
