Polycom V500 Скачать руководство пользователя страница 115

Страница: 115 / 146

Diagnostics and General Troubleshooting

7 - 15

Audio

Symptom

Problem

Corrective action

No audio at your site

The far site is muted.

Look for the far site

Mute

icon. Ask the far site to

unmute the microphone.

Note

: The far site’s microphone may be muted even

if you do not see a far site

Mute

icon.

The volume may be turned
all the way down.

Use the remote control to turn up the volume.
Check the monitor’s volume setting.
Check the system’s audio output using the

Speaker

Test

under

Diagnostics > Audio

. You should hear a

400 Hz tone.

The far site’s microphones
are not placed correctly.

Ensure that each person who speaks is facing a
microphone and is close enough to it.

The far site’s microphone is
not connected or does not
have power.

Ask the far site to check the cable to the microphone.

Too many line errors.

Try the call again later.

ISDN voice algorithm is
incorrect.

Go to

System > Admin Settings > Network > ISDN.

Change the

ISDN Voice Algorithm

selection (

aLaw

uLaw

The monitor’s audio inputs
are not connected properly.

Check audio output using the

Speaker Test

screen

under

Diagnostics > Audio

. You should hear a 400

Hz tone.
Ask someone at the far site to speak into the
microphone, and check the

Far Site Audio

meter on

the

Audio Meter

screen under

Diagnostics > Audio

to determine whether your system is receiving audio.

The system’s audio outputs
are not connected properly.

Check the system’s audio connections to the
monitor.
Verify that the system is connected to the correct
audio connectors on the monitor.

The people at the far site
cannot hear you.

The people at your site are
too far from the system.

Move closer to the system.

Your system’s microphone
is muted.

Check your system for one or more of these mute
indications:

•

Near site mute icon on the screen

•

System indicator is red

To unmute the system, press the

Mute

button

on the remote control.

Your system’s microphone
does not work.

Contact your Polycom reseller for an RMA to return
the system.

Содержание V500



















































































































































Результаты поиска

Содержание V500

Отзывы:

Polycom V500, Руководство администратора, Страница: 115 / 146

Результаты поиска

Содержание V500

Отзывы: