manualshive.com logo in svg

Polycom V500, Руководство администратора, Страница: 108 / 146

Поделиться
Скачать
Polycom V500 Скачать руководство пользователя страница 108

Administrator’s Guide for the V500 System

7 - 8

Remote Control

Symptom

Problem

Corrective action

The system does not 
respond to the remote 
control.

No, low, or dead batteries 
in the remote control.

Install three AAA batteries in the remote control.

The batteries are installed 
incorrectly in the remote 
control.

Insert the batteries in the c/- position.

The room lights operate in 
the 38 Khz range and 
interfere with the remote 
control signals.

Turn off the lights in the room and try the remote 
control again.

The infrared sensor is not 
receiving signals from the 
remote control.

To check the remote control: Point the remote control 
directly at the camera and press a button. If the light 
on the system flashes, the remote control works 
properly.
Make sure the transparent protective strip has been 
removed from the infrared sensor on the front of the 
system. 
Make sure you are pointing the remote control at the 
infrared sensor on the front of the system (the black 
semicircle located to the right of the camera).

The monitor screen 
remains blank when you 
pick up the remote control.

The monitor’s power cord is 
not plugged in.

Connect the monitor’s power cord and then power on 
the monitor.

The monitor is powered off.

Power on the monitor.

The monitor is not 
connected correctly to the 
system.

Verify that the monitor is connected correctly 
according to the installation procedures in 

Connecting the Monitor

 on page 

2-2

.

The monitor is not set to 
use the signal input that is 
connected to the 
V500 system.

On the monitor, change the signal input. 
The image may take a few seconds to synchronize 
after you select the signal input that is connected to 
the V500 system.

Содержание V500



















































































































































Отзывы:

Нет отзывов