Polycom V500 Скачать руководство пользователя страница 107 | Manualshive

Страница: 107 / 146

Polycom V500 Скачать руководство пользователя страница 107

Diagnostics and General Troubleshooting

7 - 7

•

System Lights

•

Network Interface Lights

Power and Start-up

Symptom

Problem

Corrective action

The system does not start
or respond in any way

The power switch is off.

Turn on the power switches for the system and any
equipment connected to it.

The power cord is not
connected.

Make sure the power pack is connected to a power
outlet, and that its power cords are seated securely.

The power outlet is not
active, or the system’s
power supply is not
operating properly.

If you connect the system’s power cord to a power
strip, be sure the power strip is connected to a power
outlet and its power switch is on.
Check the power outlet by unplugging the system
and plugging in a lamp, radio, or other small
appliance. If it does not operate, the outlet is not
active — connect the system to a different outlet.
If the outlet is active, the problem is in the system’s
power supply. In this case, contact your Polycom
reseller for an RMA to return the system or the
defective part.

The system starts in the
software update screen

The system software is
corrupted or not loaded
properly.

Load the system software from your computer. For
instructions on how to do this, see

Keeping your

Software Current

on page

3-33

.

The system restarts over
and over

The power plug is not fully
seated.

Make sure the power plug is seated securely.

The socket is corroded.

Unplug and reseat the power plug 5 times.

The power plug is damaged
or the power supply is bad.

Contact your Polycom reseller for an RMA to return
the system or the defective part.

«
...
105
106
107
108
109
...
»

Содержание V500



















































































































































Отзывы:

Нет отзывов