Polycom Collaboration Server (RMX) 2000, Руководство по оборудованию

Страница: 21 / 48

Chapter 1-Hardware Description
Polycom, Inc.
1-13
RealPresence Collaboration Server (RMX) 2000
Components
On the RMX 2000 components are located on both the front and rear of the MCU as listed in
Table 1-6, "
RMX 2000 Component Description" . For more information see the descriptions of
the " RealPresence Collaboration Server (RMX) 2000 Front Panel” on page 1-13 and " RealPresence
Collaboration Server (RMX) 2000 Rear Panel” on page 1-15 .
RealPresence Collaboration Server (RMX) 2000 Front Panel
Figure 1-6 shows the front panel of the RMX 2000. The front panel provides access to the
RMX 2000 main CNTL modules, MPM/MPM+/MPMx modules, Power Supply drawer,
Status LEDs, and Fans.
Figure 1-6 RMX 2000 Front Panel
Please verify the type of chassis used on your RMX 2000. Starting with version 4.0, a new
environmentally friendly RMX 2000 chassis is in use. For more information, contact your next level
of support.
Table 1-6 RMX 2000 Component Description
Component Description
CNTL (CPU) Module The CNTL module controls and manages the RMX 2000. The CNTL
module has an ComExpress Pentium-M 1.4GHz processor, a 40GB
hard disk drive, 1GB Compact Flash and 1GB of DDR RAM.
The Operating System is Linux.
Power Supply Drawer The Power Supply drawer is located below the MPM/MPM+/MPMx
Cards and is connected to the backplane by means of a power
connector. It operates at 100-240 volts AC 50/60 Hz, and provides
+48VDC 700W output with built-in load sharing capabilities.
Fan Drawer Three fans are mounted sideways in a drawer. Airflow is from right to
left, and out the side of the MCU. The drawer is connected to the
Back-plane by a connector.
RMX 2000
FAN
STATUS
CNTL
CNTL
MPM+80
MPM+80
PWR
STATUS
PWR FANS
ERR RDYACT HD HS
ERR RDY ACT HS
HS ERR RDY ACT
MPM/MPM+/MPMx Cards & LEDs Fan Drawer
Power supply Drawer Control Unit
& LEDs
USB ports - not for
customer use
Optional CPU &
LEDs
Fan &
Power
Status
LEDs