Poly-Tex FC3000, Руководство по сборке

Страница: 13 / 34

DETAIL A
DETAIL B
DETAIL C
DETAIL D
Intermediate Frame Assembly 13
AK-210302
13
A
B
C
D
NB1809
1" Self-Drill
Screws
NB1837 - Carriage bolt
3/8" x 1 1/4"
NB1864 - Lock washer
NB1874 - Nut
To ensure level, this
measurement must be
the same on both sides
NB1837 - Carriage bolt
3/8" x 1 1/4"
NB1864 - Lock washer
NB1874 - Nut
HY2027
FT4041
NB1832 - Carriage bolt
5/16" x 1 1/4"
NB1862 - Lock washer
NB1872 - Nut
HT1023
HT1015 HT1016
HT1016 HT1015
1
2
3
4
4 5
6
7
3'-7 7/8"
3'-7 7/8"
Important: All components attached to
clamp fittings must be mounted on the
outside of the tabs. NEVER install
components between the tabs.
5 of the Basic Frames assembled previously
will be modified to Intermediate Frames.
Assemble on a flat level surface. Ensure that frame
measures 20' from tube center to tube center before
tightening any hardware.
1. Slide one FT4041 onto each HT1015 and HT1016
for use in a step 7.
2. Join HT1015 and HT1016 using 2X NB1809
(see Detail A).
3. Slide 4X HY2027 onto the Basic Frame, two per side
for use in steps 6 and 7.
4. Install HT1015/HT1016 assembly in Basic Frame (from prior step)
using 2X HY2027 and hardware (see Detail B).
5. Ensure HT1015/HT1016 assembly is level in frame by measuring
from top of HY2027 fitting to the break in the Basic Frame centered
underneath HY2027 .This measurement should be the same on both
sides of the frame (see Detail C).
6. Install 2X HT1023 using previously placed FT4041 and HY2027
(see Detail D). To ensure parts are placed symmetrically ensure
FT4041 is the same distance from the end of the HT1015/HT1016
assembly on both sides.
7. Install 2X
NB1809 self drilling screws at each joint in the
basic frame. The screws should be driven from the inside of the
structure towards the outside.
7
NB1809
1" Self-Drill Screws