DETAIL A
DETAIL B
DETAIL C
DETAIL D
Frame and Windbrace Installation
14
AK-210302
14
A
B
C
D
HP3506
NB1832 - Carriage bolt
5/16" x 1 1/4"
NB1862 - Lock washer
NB1872 - Nut
2X FT2079
NB1832 - Carriage bolt
5/16" x 1 1/4"
NB1862 - Lock washer
NB1872 - Nut
4X FT2079
HP3503
2X FT2079
NB1809
1" Self-Drill Screws
1
2
End Frame
3
4
3 4
5
Important: Make sure screws
and ends of carriage bolts do
not face outwards to avoid
damage to the poly covering.
All components attached to
Speed Hooks must be mounted
on the outside of the tabs.
NEVER install any components
between the tabs.
HP3506
HP3503
Note: Do not tighten bolts until all parts are placed,
plumbed and leveled.
1.
Place 1X Basic Frame on first stubs of the Skid Rails.
2.
Place an Intermediate Frame on the second set of stubs.
3.
Install
HP3506
between the intermediate frame and
the next stub using 2X
FT2079
at each end. The
lower
FT2079
pair should be 3 7/8" above the Skid
(see Detail A and B).
4.
Install
HP3503
between the intermediate frame and
the end frame by placing 2X
FT2079
on top of the 2X
FT2079
installed at the top of
HP3506
in the previous
step. Install 2X
FT2079
at the top end of
HP3503
(see Detail B and C).
Note: It may be necessary to slightly bend the tip of
HP3503
for the best possible connection.
5.
Plumb and level frames. Tighten bolts. Install 2X
NB1809
at the frame connections (see Detail D).
6.
Install remaining Intermediate Frames and Basic Frame.
7.
Repeat Wind Brace install on remaining corners.
