POLTI VAPORETTO LECOASPIRA PROGRAM, Инструкции по использованию

Страница: 24 / 38

LECOASPIRA PROGRAM
157
ENGLISH
A5) TILE WALLS
ACCESSORIES TO BE USED: steam + suction nozzle ( D ) with insert as per the following table:
ACCESSORIES
REFERENCE LET-
TER
PICTURE FUNCTION
steam + suction nozzle
and 200 mm window
cleaning insert
D + D1
To vacuum and clean
large surfaces with
steam
steam + suction nozzle
and 130 mm window
cleaning insert
D + D2
To vacuum and clean
medium-small surfaces
with steam
+
+
FUNZIONE VAPORE-ASPIRAZIONE
To dissolve deposited scale, remove grease, polish and remove smears.
Switch on the boiler and set the steam pressure according to how dirty the surface to be treated
is, following the instructions in the relative paragraph (5.2).
Press the button
(A5) on the handle to dispense steam over the surface to be cleaned.To stop
the steam flow, simply release the button (A5) .
Then activate suction by means of the button (A4) to dry the surface treated. Keeping the but-
ton pressed (A4) , select the desired suction power (see paragraph 5.1).
N.B. For best results, press the rubber window cleaning fitting against the surface to be dried,
moving from the top to the bottom.
N.B.If the surface is very dirty, we recommend vacuuming and washing deep-down, activating
both steam and suction simultaneously (therefore pressing button
A5 immediately followed by
switch A4 ). This will ensure that surfaces are cleaned and dried in a single trip.
LECOASPIRA PROGRAM - M0S10133 1S01_7:Layout 1 04/05/2012 10.07 Pagina 157