LECOASPIRA PROGRAM
144
ENGLISH
Do not use only demineralized water but mix it as described above with tap water.
We recommend you use original Polti products only, as products of other brands may not be suitable for
use in Polti products and could cause unwelcome difficulties. Never use distilled water or scented water.
3) SWITCHING ON
Open the monoblock socket door (
9
), insert the monobloc plug (
A6
) of the flexible hose (
A
) pushing it
until you hear the click of the hooking mechanism (
A7
)(fig. 6).
Connect the power plug (
13
) to a suitable electric socket.
Switch on the appliance by pressing the power switch (
1
) (fig.7). A buzzer indicates that the ap-
pliance has been turned on correctly, and it starts automatically in manual mode MA.
N.B. The handle of the flexible hose (
A2
) is fitted with a safety button (
A3
) to prevent the acciden-
tal activation of steam delivery by children or people who do not know how it works. Should the ap-
pliance be left momentarily unguarded, move the safety button
(A3)
to the off position. To continue
steam delivery, move the switch back to its original position.
4) HOW TO USE
Lecoaspira Program can be used two different ways:
MANUAL OR PROGRAMMED.
MANUAL MODE: envisages the possibility of manually adjusting the quantity of water dispensed
and the suction power based on need and the surfaces to be cleaned.
PROGRAMMED MODE: allows you to choose from 4 pre-set cleaning programmes. Every pro-
gramme is developed to automatically dispense, in sequence, the amount of steam and suction
power necessary to clean a specific surface. In programmes that envisage the use of the two fun-
ctions, steam and suction, the suction function starts automatically after the steam function and
lasts in proportion to that of the steam, enabling the surface treated to dry.
The times that steam and suction are supplied have been carefully calibrated for various types of
surfaces and have been developed on surfaces with standard dimensions. When cleaning very
large areas, at the end of the cycle it is possible to immediately restart the programme by simply
pressing the (
A5
) button in order to complete the cleaning of the entire surface.
Otherwise it is possible to finish the job in manual mode (see paragraph SET THE SUCTION LE-
VEL IN MANUAL MODE for the suction function or paragraph SET THE STEAM LEVEL IN MA-
NUAL MODE for the steam function).
N.B: If using in programme mode, remember that the suction speed and the quantity of steam are
set and therefore it is not possible to adjust them manually.
LECOASPIRA
PROGRAM
- M0S10133 1S01_7:Layout 1
04/05/2012
10.07
Pagina 144
Содержание VAPORETTO LECOASPIRA PROGRAM
Страница 1: ...PROGRAM...
