POLMAR DB-50M, Руководство пользователя

Страница: 80 / 93

RPTR: OFFSET direction setup, in
standby, press the key programmed
as RPTR function will change the offset
direction. When LCD displays ”+”, means plus offset, when the
LCD displays ”-”, means minus offset.
This function is valid only when current channel set with offset
frequency.
NOTE
PRI: Add or delete priority channel:
In channel mode, press the key
programmed as PRI function to set
priority channel, when the LCD displays the current channel is
set as priority channel. Repeat above operation, the disappear,
the current channel is not set as priority channel.
LOW: Output power setup, in standby,
press the key programmed as LOW
function will change the power level.
When LCD displays HIGH, the transmitting power on current
channel is high. When LCD displays MID1, the transmitting
power on current channel is middle 1, When LCD displays MID2,
the transmitting power on current channel is middle 2. When
LCD displays LOW, the transmitting power on current channel is
low.
TONE: CTCSS/DCS code setup. In
standby, press the key programmed
as TONE function will be able to setup
CTCSS/DCS code. When the LCD displays “ENC” and CTCSS
frequency, press the [UP/DOWN key to choose CTCSS encode.
When the LCD displays “ENC”, ”DEC” and CTCSS frequency, press
the microphone [UP/DOWN] key to choose CTCSS decode. When
the LCD displays “DCS” and DCS code, press the microphone [UP/
DOWN] key to choose DCS code
MHZ: In VFO mode, press the key
programmed as MHz function, the
megabit digital in the LCD flashes,
now turn the channel knob or microphone [UP/DOWN] key to
adjust frequency by 1 MHz step. In channel mode, press this
key, the channel number flashes, now adjust selector knob or
microphone [UP/DOWN] key to adjust channel.
REV: In standby, press the key
programmed as “REV” function to
turn-on or turn off Frequency Reverse
function.
HOME: HOME channel switch, in
standby press the key programmed
as “HOME” function to switch between
HOME channel and current channel.
MAIN: Main band switch, in standby
press the key programmed as “MAIN”
function to choose left band or right
band as Main band.
VFO/MR: Working mode switch. In
standby, press the key programmed
as “VFO/MR” function to switch
between channel mode and frequency mode.
SCAN: scan function, in standby,
press the key programmed as “SCAN”
function to start channel scan or
frequency scan.
SQL OFF: Turn off Squelch, in standby,
press the key programmed as “SQL
OFF” function to turn off squelch, you
can hear very weak signal, repeat the above function to turn on
squelch.
35