- 36 -
2000_DE-Wartung_293
EN
MAINTENANCE
Change tine carrier
WARNING
Risk of injury resulting in death or other serious injury
when transporting dismantled tine carrier.
•
Always hold a tine carrier at the end with the
tines. The tines are turned downwards so
that they do not cause damage to them-
selves or others.
Removing the tine carriers
1. Open and collect linch pins
2. Remove tine carrier from beam
Attach tine carriers
1. Attach new tine carriers to beam
2. Secure new tine carriers with linch pins (1).
Make sure that linch pins are attached with the
link in the direction of rotation (see illustration).
CAUTION
Risk of injury due to lost or ejected tine carrier
•
Observe the direction of rotation of the tines
when reattaching the tine carriers. The
linchpin must close in the rotation direction.
084-19-250
Direction of rotation
•
Check the linchpins for damage, deforma-
tion, and that spring clamps are functioning.
Disposal of old equipment
Take service-life expired equipment to a legally regulated
waste material recycling centre.
Raising the machine
The position (1) at which the jack may be used is indicated
by stickers on the axles, left and right.
1
