Pocket Air MB0500300, Инструкция по эксплуатации

Страница: 15 / 32

13
2. Disinfection by alcohol
- It is important to disinfect the medication cup twice a week (disinfection once every 3 to 4 days).
- Rinse the medication cup with distilled water.
- Immerse the medication cup in 75% ethyl alcohol for one (1) minute.
- Rinse the medication cup with distilled water again, shake off excess water and allow
parts to be fully air dry on a clean dry towel.
- Make sure that all parts are clean and dry before storage or use.
Cleaning and Disinfection
Device should be cleaned and disinfected after every application to prevent
the growth of microorganisms, which increases the risk of infection.
After every use:
Daily disinfections
Clean the nebulizer after each inhalation.
Clean
the mask and mouthpiece
with neutral detergent before first use and after
each use.
1. Remove the residual solutions in the medication cup.
2. Pour some distilled water into the medication cup.
3. Turn on the device to nebulize the distilled water for 1 to 2 minutes to clean the mesh.
4. Remove batteries or disconnect the adapter from the main unit.
5. Remove the medication cup from the main unit.
6. Wash and rinse the medication cup with distilled water.
7. Shake off excess water and allow parts to be fully air dried on a clean, dry towel.
8. Use gauze or clean towel to wipe off stains on the main unit if necessary.
9. Make sure that all cleaned parts are completely dry before you store or use them
next time.
1. Hand wash the mask and the mouthpiece in warm (30°C) water using neutral
detergent and gently rub it for at least 30 seconds.
2. Rinse well with distilled water.
3. Allow them to air dry and keep away from direct sunlight.
1. Keep the battery compartment dry all the time.
2. Do NOT poke the mesh with finger, cotton swab or any object.
3. Do NOT clean parts in a dishwasher.
4. Do NOT use microwave to dry any parts.
1. Disinfection by boiled water
- It is important to disinfect the medication cup twice a week (disinfection once every 3 to 4 days).
- Rinse the medication cup with distilled water.
- Use a saucepan to boil distilled water. Wait for the distilled water to boil.
- Turn off the heat source.
- Carefully immerse the medication cup in the boiled water for a maximum of ten (10) minutes.
- Carefully remove the medication cup from the boiled water and shake off excess water.
- Allow parts to fully air dry on a clean, dry towel, and out of reach of children.
- Make sure that all parts are clean and dry before storage or use.