Pneumax 140-SP, Руководство по установке

Страница: 15 / 36

Pneumax PTO-Driven Compressor Kit Installation Guide
Page 15 of 36
Installation and Adjustment of the Auto-Sync Air
Balancing System
Colored hoses and fittings are supplied with the compressor kit for the average installation.
The schematic is color coded to simplify installation. This also makes future service issues
easier to resolve, provided suggested hose colors are used.
CAFS retrofit kits and any other system shipped as separate components will need
calibrating after installation.
Note: Before you make any adjustments, make sure the oil level in the sump is correct, and
the air lines do not have leaks or obstructions. Do not adjust the Auto-Sync
components to compensate for problems elsewhere in the CAF system.
Always start by adjusting UNLOAD mode, then FIXED, then AUTO.
Auto-Sync
1. UNLOAD Mode Adjustment
1. Set the controls on the Auto-Sync control panel to FIXED and UNLOAD. (UNLOAD for
electric valves)
Manual Valve Control
2. Close all air discharges.
3. Locate the Air Inlet Trim Valve, near the air inlet on the compressor.
Air Inlet
Trim Valve
Fixed/Manual Pressure
Regulator
Compressor adjustment points