0.00.70
INTRODUCTION
01OCT08
DO
NOT
DUPLICATE
For
Simulator
Use
Only
PMDG MD-11
passenger and cargo load. If your current Zero Fuel Weight is low, you
may carry a full load of fuel. If your Zero Fuel Weight is heavy, you may
be limited in the amount of fuel that you can carry. (On some routes it is
not possible to carry a full fuel load if you are also carrying a full
passenger and cargo load….so you must trade one for the other!)
Pressing “Save to File” will update your aircraft.cfg file with the load you
have selected and this will be reflected within Microsoft Flight Simulator
when you load your PMDG MD-11.
In FSX we have added a new feature that allows you to send your
updated load directly to the simulator while the simulator is running.
When loading cargo on the PMDG MD-11F airplane, you may see cargo
items on the main deck of the airplane while the cargo doors are open.
(This feature depends upon how much cargo you have loaded.)
Reducing the cargo load to nothing will give you an empty airplane visual
model.
Wide Panel Configuration Setting:
We have added an option inside the PMDG MD-11 Load Manager that will
allow you to select the “wide panel” option if you are using a wide screen
display and wish to eliminate the stretching that FS performs on standard
sized panels when they are run on wide screens.
The wide screen selector is located near the top left of the Load Manager.
If you install liveries AFTER selecting wide screen, you should toggle this
setting back to NORMAL, and then select WIDE SCREEN once again to
update the new liveries in your installation.
Liveries will always be installed in standard width. If you want widescreen
2D Panels, you must run this process after every installation
NOTE: Widescreen/normal panel changes must be done once for the
PAX type by having any passenger type configuration is selected and
once again for FREIGHTER by having the cargo configuration
selected
