0.00.48
INTRODUCTION
01OCT08
DO
NOT
DUPLICATE
For
Simulator
Use
Only
PMDG MD-11
This image shows the mouse click hotspots that are primarily used to
control the 2D panel, as well as the cursor the user will see when the
mouse is moved over these click spots.
Please refer to the previous discussion to understand what each cursor
is telling you about the type of click operation you can perform.
The next page explains what each click area on the main panel will
allow you to control:
1.
Left Click:
Display Lights Panel (lower part of Overhead
Panel)
Right Click:
Display full Overhead Panel.
2.
Left Click:
System Display Control Panel and Display Unit
4 (usually System Display) and associated
overhead panel section if applicable.
Right Click:
Radios, Audio Control and Transponder
Panels.
3.
Left Click:
Slide open Flight Control Panel (moves to the
left and overlays the Electronics Instruments
System Control Panel - ECP)
Right Click:
Left-shifted glareshield to include the whole of
both the FCP and ECP.
4.
Left Click:
MCDU console.
Right Click:
Show Standby Secondary Flight Display.
5.
Left Click:
Forward Pedestal (Parking Brake, Speedbrake,
Throttles, Flaps and Dial-a-Flap, Autobrakes,
Captain and FO radio tuning panels.)
Right Click:
Aft Pedestal. (Audio Control Panels,
Observers Radio Panel, Transponder, Aileron
and Elevator trim, 3
rd
MCDU Console, ADG
Handle.)
6.
Left Click:
First Officers Main Panel View.
7.
Left Click:
Source Input Selector Panel (SISP)
