47
15
Manufacturer menu - structure
Confirm service configuration
Air supply and exhaust control
Pressure air supply/exhaust
AIN1/AIN2 maximum pressure
value
Fan k coefficient
Start level
Bypass settings
Bypass support
•
Yes, No
Control mode
•
Smooth, Bistate
Minimum bypass control
Maximum bypass control
Bypass Kp setting
Bypass Ki setting
Bypass Td setting
Actuator full open time
Primary heater
Heater Kp settings
Heater Ki settings
Heater Td settings
Min. control value
Max. control value
Secondary heater
Heater Kp settings
Heater Ki settings
Heater Td settings
Start delay
Actuator full open time
Cooler
Cooler Kp settings
Cooler Ki settings
Cooler Td settings
Mixer full open time
Filters settings
Air supply filter
– type:
•
None, Time, Pressure switch,
Transducer
Exhaust filter
– type:
•
None, Time, Pressure switch,
Transducer
Configured by installer
Filters replacement:
•
Installer/User/Configured by installer
Functions available for installer:
•
Filter classes parameters
•
Timed mechanism
•
Detection by pressure switches
•
Pressure difference transducers
•
Dirt test delay
•
Dirt test adjustment
Filter classes parameters:
•
Standard class:
➢
Filter class
➢
Initial resistance
➢
Final resistance
➢
Dirt alarm
➢
Central emergency mode
•
Medium class (as above)
•
Accurate class (as above)
Filter classes default settings
(yes/no)
Exchanger anti-freezing
Exchanger de-freezing control
•
On, Off
Dewpoint use*
•
Yes, No
Dewpoint hysteresis*
Use primary heater
•
Yes, No
De-freezing turn on temp.
De-freezing turn off temp.
Air supply fan velocity
Exhaust fan velocity
Minimum air supply fan velocity
Air supply fan velocity change
•
Yes, No
Air supply temperature protection
Protection against too high temp.
•
No, Alarm and turn off, Turn off
secondary heater
Air supply temperature limit value
Operation pause duration
Protection against too low temp.
•
No, Alarm and turn off, Turn off
secondary heater
Low supply temp. threshold
Detection time of low temp.
Sensor behind exchanger
•
Yes, No
Erase alarm
•
Yes, No
Analog outputs change
OUT1-OUT4 (0-10V)
•
None, Air supply fan, Exhaust fan,
Bypass/rotary exchanger, Cooler,
Secondary heater, Mixing chamber
actuator, Primary heater
Control change 0 - 10 V
OUT1…OUT4 (0 - 10 V)
•
Reversed/normal control
•
Minimum voltage value
•
Maximum voltage value
PWM settings*
Primary heater PWM control
The menu is available after entering the service
password
.
Depending on controller configuration
and whether it is on or off, some of menu
parameters might be unavailable. These are
marked with “*”
.
Содержание ecoVENT MIDI
