Perlight Solar Co., Ltd.
浙江宝利特新能源股份有限公司
© Perlight Solar 2015
www.perlight.com
Page 2 of 4
25 years
If, within a period of twelve ( 25 ) years from the date shown in the invoice to the CUSTOMER any MODULE(s)
exhibits a power output less than 80 % of the minimum “Peak Power at STC”(standard test conditions) as specified at
the date of invoice in Perlight Solar´s Product Information Sheet. The actual power output of the module shall be
determined for verification using Standard Testing Conditions only. The actual power output measurement is either
carried out by a Perlight Solar facility or by a Perlight Solar recognized 3rd party testing institute. Testing equipment
tolerances will be applied to all actual power output measurements.
And such loss in power is determined by
Perlight, at its sole discretion, to be due to the Modules’ defects in material or workmanship attributed to
Perlight, and Perlight will, at its sole option and discretion, either (1) make up such loss in power by
providing to Customer additional Modules or provide an appropriate residual market value of the product(s)
as compensation; or (2) repair or replace the defective Modules including free shipping to the place sup
plied
by Perlight.
The remedies set forth in this clause 2 shall be the sole and exclusive remedies provided under the “Limited Peak
Power Warranty”.
3. Exclusions and Limitations
(1) In any event, all warranty claims must be filed within the applicable warranty period.
(2) The “Limited Product Warranties” and the ”Limited Peak Power Warranties” do not apply to any MODULES
which have been subjected to:
Misuse, abuse, neglect or accident;
Alteration, improper installation or application;
Non-observance of Perlight Solar’ s installation and maintenance instructions;
Repair or modifications by someone other than an approved service technician of Perlight Solar;
Power failure surges, lightning, flood, fire, accidental breakage or other events outside Perlight Solar’s
control.
(3) Both, the “Limited Product Warranties” and “Limited Peak Power Warranties” do not cover any transportation
charge, customs clearance or any other costs for return of the MODULES, or for reshipment of any repaired or replaced
MODULES, or costs associated with installation, removal or reinstallation of the PV-modules.
(4) Warranty claims will not be honored if the type or serial number of the MODULES have been altered, removed or
made illegible.
(5)
In addition, the limited warranties do not apply to any cosmetic change in appearance stemming from
the normal wear and tear over time of product materials. Any color change on module or any other
changes on module appearance do not represent defects, insofar as the change in appearance does not
stem from defects in material and/or workmanship, and does not cause degradation of functionality of
the module, which are exempt from this warranty.
4. Limitation of Warranty Scope
These “Limited Warranties for PV Modules” as set forth herein are expressly in lieu of and exclude all other express or
implied warranties, including but not limited to warranties of merchantability and of fitness for particular purpose, use,
or application, and all other obligations or liabilities on the part of Perlight Solar, unless such other obligations or
liabilities are expressly agreed to in writing signed and approved by Perlight Solar. Perlight Solar shall have no
responsibility or liability whatsoever for damage or injury to persons or property, or for other loss or injury resulting
from any cause whatsoever arising out of or related to the MODULES, including, without limitation, any defects in the
MODULE, or from use or installation. Under no circumstances shall Perlight Solar be liable for incidental,
consequential or special damages, howsoever caused. Loss of use, loss of profits, loss of production, and loss of
Содержание Sheet Metal/Flat Roof Mount Kit
Страница 30: ......