Plug-In Solar Sheet Metal/Flat Roof Mount Kit Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 37

Plug-In Solar Sheet Metal/Flat Roof Mount Kit Скачать руководство пользователя страница 19

Plug-In Solar

289 London Road | Burgess Hill | West Sussex | RH15 9QU
www.pluginsolar.co.uk | [email protected] | 01444 672005

Page 19

COMMISSIONING YOUR PLUG-IN SOLAR INSTALLATION

Once you have installed, inspected and tested your Plug-In Solar kit, it is a requirement that you
complete and return a G83/2 SSEG Installation Commissioning Confirmation Form to your District
Network Operator (DNO) within 28 days.

Distribution  Network  Operators  (DNOs)  own  and  operate  the  distribution  network  of  towers  and
cables that bring electricity from the national transmission network to homes and businesses. They
don’t sell electricity to consumers, this is done by the electricity suppliers.  Informing the DNO of
your installation allows them to manage the grid more effectively.

There are 9 different DNO’s across the UK, so you must make sure you submit your form to the
correct DNO in your area.  You can find your DNO by entering your postcode using this website:

https://www.ssepd.co.uk/Whoismynetworkoperator/

Once you have identified your DNO you must download a G83/2 SSEG Installation Commissioning
Confirmation Form from their website (or request that they e-mail one to you).

Completing G83/2 SSEG Installation Commissioning Confirmation Form

An example G83/2 Commissioning Confirmation Form can be found in Appendix 2 of this
Installation Manual. Please note G83/2 forms differ between DNO’s, this is an example only.

The G83/2 SSEG Installation Commissioning Confirmation Form is relatively self-explanatory,
however there are a number of sections that you must complete correctly:

SSEG Installation Address Details Section

A  Meter  Point  Administration  Number,  also
(MPAN),  is  a  21-digit  reference  used  in  the
UK  to  uniquely  identify  electricity  supply
points.    You  must  correctly  fill  in  your  own
MPAN in this section of the form.

Your  MPAN  can  be  found  on  your  electricity
bill and often looks like the image on the left.

SSEG Details Section

Within  the  SSEG  Details  section  of  the  form,
fill  in  the  details  of  your  installation.  The
capacity  will  be  the  size  of  the  Plug-In  Solar
kit  you  purchased,  i.e.  1kW.    The  Primary
Energy Source must always be filled as ‘Solar
PV’.    If  you  have  any  existing  SSEG’s  (e.g.
wind/solar) you must also declare these here.

SSEG Installer Details Section

As Plug-In Solar kits are DIY, self installed
solar systems you should complete this
section

as

the

installer.

In

the

Accreditation/Qualification section you should
fill this in as ‘N/A (Self-Installed)’, unless you
have an appropriate accreditation. This
section of the form also needs to be signed.

«
...
17
18
19
20
21
...
»

Содержание Sheet Metal/Flat Roof Mount Kit






































Отзывы:

Нет отзывов