Installation manual SR85/CF COVER FEEDER
Loosen the
screw, and fasten
the ground cable.
Secure the
PSH with two
cable ties.
Route the Orange and Purple
cable into the Cutout in the
rear frame of the machine.
Figure 2, Rear view
9.
Loosen the screw, and fasten the ground cable, according to figure 2.
10. Route the PSH down by the existing Harness, according to figure 2.
11. Secure the PSH with two cable ties, according to figure 2.
12. Split the PSH. So that you have one end with the red and black cable. And one
end with the Orange and Purple cable.
13. Route the Red and Black cable to the right of the machine, seen from the rear
side.
14. Connect the red cable to the Power connector, according to figure 2.
15. Connect the black cable to the Ground connector, according to figure 2.
16. Secure the cable to the existing harness with a cable tie, according to figure 2.
17. Route the Orange and Purple cable into the Cutout in the rear frame of the machine,
according to figure 2.
Step 9.
Route the PSH
down by the
existing Harness.
Step 10.
Step 11.
Step 17.
Connect the red
cable to the Power
connector.
Step 14.
Connect the black
cable to the
Ground connector.
Step 15.
Secure the cable to
the existing harness,
with a cable tie.
Step 16.
1-6
