Installation manual SR85/CF COVER FEEDER
1.2 Cleaning the Fold rollers
1.
To avoid smearing and marks on the covers it is necessary to clean the fold
rollers.
2.
Set up the Booklet maker for A3 / 11x17”.
3.
Switch off the Main power switch on the Booklet Maker.
4.
Remove the two stapler heads from the Booklet Maker, according to REP 3.1 in
the SR85 Service manual.
5.
Remove the front and rear cover on the Booklet Maker, according to REP 1.1 in
the SR85 Service manual.
6.
Remove the two folder springs on the Front side according to figure 1.
Step 6.
7.
Install two new springs from the Cover feeder box, item 9 on the front side.
8.
Remove the two folder springs on the rear side same location as the front side.
9.
Install two new springs from the Cover feeder box, item 9 on the rear side.
10. Remove the folder bracket by removing four 7mm screws according to figure 2.
Step 10.
Two screws.
Step 10.
Two screws.
Figure 1
Figure 2
1-2
